Home > Supplies >

Double Bevel Squeegee Blade 90 Durometer (45-degree slope)

Squeegee Blade 90 Durometer Double Bevel
 
ADD TO CART: $39.50



Free Shipping
Product Code: S-4015


Squeegee Size:


Qty:  
Overview
 

Double Bevel Squeegee Blade 90 Durometer

Squeegee Blade 90 Durometer Double Bevel (45-degree slope) is a high-quality, solvent-resistant, long-lasting squeegee for the screen printing industry. Our squeegees are made out of top-grade polyurethane elastomers, made to last longer than most other squeegees.

Our squeegees are durable, with smooth edges and uniformity of the edges. The uniformity and smooth edges allow for a seamless coating of the ink. That is why the edges of the squeegee must be sharp and well-defined, without defects. Furthermore, our squeegees are solvent-resistant and do not soften or damage when dipped in solvent cleaners.

Specifications:
  • One roll has 144 inches of the squeegee.
  • SPECIFICATION:Thickness: 9mm- Width: (50mm)= 2 Inch/45 degree

Squeegee Durometer - shore hardness & shapes:

A durometer is the measurement of the hardness of the rubber squeegee. A higher durometer, 90, is used in the graphic industry, especially by bottle printers. The textile printers mostly use 70 durometers; some prefer 60 or 80 Duro. The lower the durometer squeegee, the more ink can be pushed onto the fabric, so if you would like to apply more ink for better coverage or if you are printing puff or gel, you may use 50 or 60 durometers. Printing squeegee comes in different shapes, such as straight edge, round (bullnose), or double bevel (beveled edge also comes in different angles). Bottle printers or hard surface printers use the bevel squeegee. There are textile printers who use bevel edges for fine textile printing.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Very durable works great November 7, 2017
Reviewer: Anonymous Person  
Thank you

Was this review helpful to you?