Light Brown Plastisol Ink

Light Brown Plastisol Ink

Light Brown Plastisol Ink (COLOR MAY VARY FROM THE PICTURE) is a high-opacity ink. Light Brown Plastisol Ink is a non-phthalate high-opacity plastisol ink. It is recommended for cotton and 50/50- poly/cotton. Note: we also manufacture plastisol ink for 100% polyester, PVC, and nylon- call to find out prices.

Highlights:

• Non-phthalate high-opacity ink.
• Under-basing is unnecessary - creamy & soft and very low wet tack for easy printing.
• Tack-free formulation.
• Very bright colors.
• Outstanding printing because of the creamy nature of this ink and ease of use. There is no need to add reducers as the ink is ready for use and recommended for manual and automatic machines.

---

Application recommendations for Light Brown Plastisol Ink:

• Use mesh 86-110 for dark shirts- you need to apply a heavier deposit of plastisol ink for coverage on dark shirts.
• Use 110-305 mesh count for lighter colors. Some heavy shirts, such as sweatshirts, may require an under-base.
• Whenever you are avoiding an under-base, make sure to put a little heavier two coats- try it first; chances are you may not need an under-base.
• Squeegee 60 -70 uses a direct emulsion to make screens - we recommend a high-solid one part Like "QXL" (45% solids).
• For a heavier deposit of plastisol ink, you need a higher solids emulsion and the application of 2/2 emulsion coatings, two on the print side and two on the squeegee side.
• Cotton and 50/50 cotton/polyester fabrics print/ flash print for dark shirts and one stroke for lighter and white materials fully cured @ 350F

*Store at room temperature and avoid storing in direct sunlight/humid air. Do not dry-clean