Neon Green Plastisol Ink

Neon Green Plastisol Ink

Neon Green Plastisol Ink (COLOR MAY VARY FROM THE PICTURE) is a high opacity Fluorescent ink. Fluorescent Purple- Neon Plastisol Ink is a non-phthalate plastisol ink for most dark garments; under base, it MAY BE NEEDED FOR SOME DARK SHIRTS. Recommended for cotton and 50/50- poly/cotton note: we also manufacture plastisol ink for 100% polyester, PVC, and nylon- call to find out prices.

Highlights:

• Non-phthalate ink
• Creamy & soft and very low wet tack for easy printing.
• Tack-free formulation.
• Very bright colors.
• Outstanding printing because of the creamy nature of this ink. There is no need to add reducers as the ink is ready for use, and it is recommended for both manual and automatic machines.

---

Application recommendations for Neon Purple Plastisol Ink:

• Use mesh 110 for dark shirts- apply a heavier deposit of plastisol ink for coverage on dark shirts.
• Use 110-305 mesh count for lighter colors. Some heavy shirts, such as sweatshirts, may require an under-base.
• Whenever you are avoiding an under-base, make sure that you put two coats that are a little heavier, use 110 mesh count, and use a high-solid emulsion. Try it first. Most of the time- base may not be required.
• Squeegee 60 -70 - use a direct emulsion to make screens - we recommend high solid one part Like "QXL" (45% solids).
• For a heavier deposit of plastisol ink, you need a higher solids emulsion and application of three/two coatings (3/2) of emulsion, two on the print side and two on the squeegee side.
• Cotton and 50/50 cotton/polyester fabrics print/ flash print for dark shirts and one stroke for lighter and white materials fully cured @ 350F

*Store at room temperature and avoid storing in direct sunlight/humid air.

**Caution: Do not dry clean after printing**

**Caution: Do not dry clean after printing**