Screen printing Squeegee Blade 70 Durometer Double Bevel (45-degree slope)
Squeegee Blade 70 Durometer Double Bevel is a high-quality, solvent-resistant, long-lasting squeegee for the screen printing industry. Our squeegees are made out of top-grade polyurethane elastomers, made to last longer than most other squeegees.
Our squeegees are durable, with smooth edges and uniformity of the edges. The uniformity and smooth edges allow for a seamless coating of the ink. That is why the edges of the squeegee must be sharp and well-defined, without defects. Furthermore, our squeegees are solvent-resistant and do not soften or damage when dipped in solvent cleaners.
Specifications:
- One roll has 144 inches of the squeegee.
- SPECIFICATION:Thickness: 9mm- Width: (50mm)= 2 Inch-45 beveled
Squeegee Durometer - shore hardness & shapes:
The durometer is the measurement of the hardness of the rubber squeegee. A higher durometer, 90, is used for the graphics industry, especially by bottle printers. The textile printers mostly use 70 durometers; some prefer 60 or 80 Duro. The lower the durometer squeegee, the more ink can be pushed onto the fabric, so if you like to apply more ink for better coverage or if you are printing puff or gel, you may use 50 or 60 durometers. printing squeegee comes in different shapes, such as straight edge, round (bullnose), or double bevel (beveled edge also comes in different angles). The bevel squeegee is used by bottle printers or hard surface printing. There are textile printers who use bevel edges for fine textile printing.
