 |
BLOCKOUT- TSR (blue), the rapid-drying solution for plastisol, UV, and solvent inks, is designed to seal pinholes and cover screen borders. With its rich blue hue and heavy consistency, just one application of BLOCKOUT- TSR provides ample coverage like a filler, saving you time and effort. Say goodbye to multiple coatings and hello to efficiency!
Type:
Water base product
Color: Blue Viscosity: 14,500cps, Brookfield viscometer@ 20rpm
Solids: 26%
Solubility in Water: 100%
Weight per gallon: 7.6 pounds
HIGHLIGHTS:
DARK BLUE THAT STANDS OUT TO LOCATE PIN HOLES
FAST DRYING AS IT HAS HIGHER SOLIDS
CLEANS OUT WITH WATER AND RECLAIMS QUICKLY.
HEAVY, AND YOU MAY NOT REQUIRE TWO COATS
IT HAS GREAT LEVELING PROPERTIES; THE FILM LAYS DOWN PERFECTLY
APPLICATION:
BlockOut or fillers may be used for filling the area where you do not like the ink to pass through to the fabric while printing and has to be blocked. The area that is not required for the ink to pass through is sometimes also blocked by tapes, but that is expensive and disruptive. Block Out may also be used to close pinholes on the screen. Block out TSR is a fast dry Block out and is recommended for UV, Solvent, and Plastisol inks. Blockout TSR can be washed away with water or reclaimed by Xenon’s XER. The shelf life is over two years.
|
|
|
